4-7/8" Adjustable ASA Strike for Cylindrical Locks
Simple and Clean Looking Asthetics
Very simple concept, simple adjustments
Sagging and warped doors require adjustments in the ASA strike. Today's industry standard ASA strike do not allow simple adjustments. To fix the problem we have a simple solution. The world now has an adjustable ASA strike. We encourage you to give one a try. Some applications require adjustments.
Finishes Avialable: Stainless Steel
* Other finishes available on request. Made to Order.
Full Surface Continuous Hinge
Continuous geared hinges help prevent
doors from pulling away from their frames.
Sagging doors occur most commonly when the top butt hinge or pivot has started to pull out from the frame. One way to prevent this condition is to begin with a full-length continuous geared hinge that distributes the door weight and stresses over the full length of the door and frame.
A properly installed continuous geared hinge can easily last 10 to 20 years or longer in an entrance and tolerate a great deal of abuse and heavy traffic with little or no maintenance required.
Full Surface Reinforcing Pivot
Pivot B1923 US2C LH Door Builders' Hardware SKU: 101036
Pivot B1923 US2C RH Door Builders' Hardware SKU: 101037
The Hinge Tweaker is therapy for your doors. To be more precise, the Hinge Tweaker is designed to rebend standard weight .134 gauge hinges to enable the door to operate correctly. In the door and hardware industry we would effectively call this rebending technique, "closing the swedging of a hinge" or "closing the gap"
The Hinge Tweaker when used correctly can be a time and labor saver. Utilize the Hinge Tweaker and give a lift to your sagging doors.
Product Specifications
Designed specifically for .134 Hinge Gauge alignment Product Weight: 3 lbs
Barrel Diameter: 3/4"
Length: 13 1/2"
Height: 4 1/2"
Paint: Powercoated
Finish: Fire Engine Red
Heavy Weight Hinge Tweaker
Align the door into position.
"Just a small Tweak"
Slide the Hinge Tweaker Tool
onto the Hinge Knuckle
The Hinge Tweaker is therapy for your doors. To be more precise, the Hinge Tweaker is designed to rebend heavy weight .180 gauge hinges to enable the door to operate correctly. In the door and hardware industry we would effectively call this rebending technique, "closing the swedging of a hinge" or "closing the gap"
The Hinge Tweaker when used correctly can be a time and labor saver. Utilize the Hinge Tweaker and give a lift to your sagging doors.
Product Specifications
Designed specifically for .180 Hinge Gauge alignment
Product Weight: 4 lbs
Barrel Diameter: 13/16"
Length: 20"
Height: 4 1/2"
Paint: Power coated
Finish: Blue Streak
